| KAWASAKI 705-52-30051 HD Series Pump | Permissible sliding velocity v min.:0.25 m/s; Specific static load factor K0:20 N/mm²; B:25 mm; Mass bushing:0.039 kg; Coefficient of friction µ max.:0.1; Tolerance housing:H7; d:30 mm; Specific dynamic load factor K:10 N/mm²; D:35 mm; Tolerance shaft:h8; |
| KAWASAKI 07400-10600 HD Series Pump | J min.:269.875 mm; Lock nut:AN 16; Housing:SAF 316; H1:107.95 mm; P90°:51.6 kN; Cap bolt recommended tightening torque:515.2 N·m; db:92.075 mm; Stabilizing ring:SR-19-16; ba:44.45 mm; dc:76.2 mm; |
| KAWASAKI 705-12-44010 HD Series Pump | P180°:2400 kN; J6:770 mm; Cap bolt, rec. tightening torque:400 N·m; H:591 mm; ba max.:170 mm; N4 max.:25 mm; P120°:2200 kN; P55°:6000 kN; End cover:ETS 3160 R; H1:300 mm; |
| KAWASAKI 705-52-30290 HD Series Pump | Sealed Speed Rating n3:3100 rpm; Basic Dynamic Radial Load Rating C:32500 N; Fillet Radius ra:1.00 mm; D:125.0000 mm; Oil Speed Rating Open/Shielded n2:6000 rpm; B:18.00 mm; Accessories:Two Seals; Basic Static Radial Load Rating Co:31500 N; Grease Speed Rating Open/Shielded n1:5000 rpm; d:90.000 mm; |
| KAWASAKI 705-52-32000 HD Series Pump | d:55.000 mm; Grease Speed Rating Open/Shielded n1:7500 rpm; B:18.00 mm; Fillet Radius ra:1.00 mm; Basic Dynamic Radial Load Rating C:28100 N; Oil Speed Rating Open/Shielded n2:9000 rpm; Sealed Speed Rating n3:4500 rpm; Accessories:Seal & Snap-Ring; D:90.0000 mm; Basic Static Radial Load Rating Co:21600 N; |
| KAWASAKI 705-52-30040 HD Series Pump | Sealing solution:Triple-lip seals; da max.:79.5 mm; r2 min.:1 mm; B:61.112 mm; d:69.85 mm; Da max.:104.2 mm; r1 min.:0.6 mm; Specific static load factor K0:300 N/mm²; Specific dynamic load factor K:150 N/mm²; ra max.:0.6 mm; |
| KAWASAKI 705-11-29010 HD Series Pump | Grease Speed Rating n1:4300 rpm; d:65.000 mm; Basic Static Radial Load Rating Co:25500 N; Basic Dynamic Radial Load Rating C:65000 N; D:140.0000 mm; B:33.00 mm; Fillet Radius ra:2.00 mm; Oil Speed Rating n2:5000 rpm; |
| KAWASAKI 07448-66700 HD Series Pump | Basic Radial Load Rating-Static SCO:38000 N; Speed Rating-Open and Shielded-Grease OSG:6300 rpm; Width - Outer Ring B0:27.0 mm; Accessories:300SWI Non-Filling N; Speed Rating-Open and Shielded-Oil OSO:7500 rpm; Width - Inner Ring B1:44.45 mm; Fillet Radius ra:2.00 mm; D:110.0000 mm; Diameter E:67.5 mm; Basic Radial Load Rating-Dynamic DC:61800 N; |
| KAWASAKI 07445-66300 HD Series Pump | End plug (suffix Y):EPR 22; P60°:669 kN; R1:163.512 mm; A1:228.6 mm; Cap bolt:4 x 1 1/2-6 UNC; Cap bolt, SAE grade:8; Lock nut:AN 40; P150°:222 kN; h:87.313 mm; ba:103.188 mm; |
| KAWASAKI 705-22-36080 HD Series Pump | ba:40.481 mm; L:330.2 mm; P90°:49.8 kN; R2:21.431 mm; PosiTrac Plus contact element:2 x B10724-32; P180°:31.6 kN; Housing:SAF 613; R1:53.181 mm; Cap bolt:2 x 5/8-11 UNC; Appropriate attachment bolt size G:0.75 in; |
| KAWASAKI 705-56-44090 HD Series Pump | r, r1,2 min.:0.3 mm; B:12 mm; F:9 mm; Mass inner ring:0.003 kg; d:6 mm; |
| KAWASAKI 705-52-42090 HD Series Pump | d1 ≈:88.3 mm; r3,4 min.:1.5 mm; Reference speed:4800 r/min; rb max.:1.5 mm; Mass bearing:1.32 kg; Basic static load rating C0:208 kN; da max.:74 mm; Calculation factor e:0.4; C:26.5 mm; r1,2 min.:1.5 mm; |
| KAWASAKI 705-12-38000 HD Series Pump | H:100.013 mm; H1:47.625 mm; H2:30.163 mm; Limiting speed:6000 r/min; Mass bearing unit:3.15 kg; A:53.975 mm; S:0.794 mm; J max.:139.7 mm; B:59.531 mm; Attachment bolt diameter G:12.7 mm; |
| KAWASAKI 705-12-40010 HD Series Pump | a:79.2 mm; Attainable speed for oil-air lubrication:6300 r/min; Basic dynamic load rating C:234 kN; C1:13.4 mm; ra max.:2 mm; Fatigue load limit Pu:8 kN; Reference grease quantity Gref:114 cm³; Preload class C GC:5800 N; Mass bearing:9.51 kg; Static axial stiffness, preload class D:1088 N/µm; |
| KAWASAKI 705-52-30150 HD Series Pump | B:24.00 mm; D:72.0000 mm; d:50.000 mm; Grease Speed Rating n1:16000 rpm; Basic Dynamic Radial Load Rating C:31900 N; Basic Static Radial Load Rating Co:34500 N; Oil Speed Rating n2:22000 rpm; Fillet Radius rb:0.15 mm; Fillet Radius ra:0.64 mm; |
| KAWASAKI 705-12-38010 HD Series Pump | Limiting speed:750 r/min; d2 ≈:578 mm; G1:45 mm; r1,2 min.:7.5 mm; B1:295 mm; s1 max.:35.1 mm; da max.:577 mm; Misalignment factor k1:0; Da min.:673 mm; ra max.:6 mm; |