| KAWASAKI 705-52-31070 PC Excavator Series Pump | T min.:-20 °C; T max.:100 °C; L3:51 mm; N:19mm; d:12 mm; Weight:0.93 kg; C:12.8 kN; Designation of housing:T204N-; N1:16 mm; G:M6x1; |
| KAWASAKI 705-52-31210 PC Excavator Series Pump | Characteristic rolling element frequency, BSF:7.38 Hz; Internal Clearance:C3-Loose; Manufacturer Name:NTN; Characteristic inner ring frequency, BPFI:7.93 Hz; Outer Race Width:0.709 Inch | 18 Mill; b max:3 mm; Nlim (grease):7,000 rpm; Noun:Bearing; Maximum Capacity / Filling Slot:No; Dynamic load, C:29.5 kN; |
| KAWASAKI 705-41-07500 PC Excavator Series Pump | N:17mm; S:18.8 mm; T max.:100 °C; J:127 mm; B1:51.1 mm; d:31.75 mm; Designation of housing:P207-; Recommended tightening torque for set screw:8 Nm; G:M6x1; H:47.6 mm; |
| KAWASAKI 705-41-02470 PC Excavator Series Pump | S:14.9 mm; SW:5 mm; Recommended tightening torque for set screw:22 Nm; d:60 mm; A5:38.8 mm; T max.:100 °C; B:53.7 mm; Designation of bearing:US212G2T04; C0:32.8 kN; Weight:1.3 kg; |
| KAWASAKI 705-11-34110 PC Excavator Series Pump | H:190 mm; Recommended tightening torque for set screw:11.5 Nm; d1:67.2 mm; e:24 mm; Weight:2.45 kg; Z:72.4 mm; T min.:-20 °C; C:35.1 kN; A1:13 mm; L:116 mm; |
| KAWASAKI 705-56-34490 PC Excavator Series Pump | d:30.16 mm; N1:24.5 mm; C0:11.2 kN; C:19.5 kN; Weight:0.91 kg; Recommended tightening torque for set screw:3.7 Nm; Designation of bearing:UC206-19G2T04; Z:18.9 mm; A1:27.5 mm; H1:14.5 mm; |
| KAWASAKI 705-41-02690 PC Excavator Series Pump | Weight / Kilogram:1.873; Category:Bearings; Inventory:0.0; ra max:2 mm; E:113 mm; d:60 mm; B:31 mm; Minimum Buy Quantity:N/A; da min:71 mm; Min operating temperature, Tmin:-40 °C; |
| KAWASAKI 705-56-34290 PC Excavator Series Pump | T max.:100 °C; B:30 mm; A2:50 mm; C:31.85 kN; d:36.51 mm; A1:13 mm; T min.:-20 °C; d1:65 mm; C0:20.8 kN; Weight:2.4 kg; |
| KAWASAKI 705-56-24020 PC Excavator Series Pump | Designation of bearing:EX209G2; A:60 mm; E:25 mm; C:31.85 kN; J:90 mm; Designation of housing:PA209N-; T min.:-20 °C; L:120 mm; Recommended tightening torque for set screw:11.5 Nm; Dz:95 mm; |
| KAWASAKI 705-56-34000 PC Excavator Series Pump | B:34 mm; Max operating temperature, Tmax:120 °C; Nlim:2,400 rpm; ra max:2 mm; D:180 mm; Characteristic inner ring frequency, BPFI:5.9 Hz; d:100 mm; d1:119 mm; da max:119 mm; f0:14.4; |
| KAWASAKI 705-56-24030 PC Excavator Series Pump | H:30.2 mm; S:6 mm; C:9.55 kN; G:M6x1; Designation of bearing:US203G2T04; E:10 mm; Designation of housing:PAE203N-; Designation of closed end cover:SCC203; T min.:-40 °C; H2:57 mm; |
| KAWASAKI 705-41-08010 PC Excavator Series Pump | C0:51.8 kN; B:71 mm; T min.:-40 °C; Weight:2.5 kg; D:130 mm; C1:11.3 mm; m:12 mm; G:7/16-20UNF; SW:5.56 mm; d:61.91 mm; |
| KAWASAKI 708-3S-04573 PC Excavator Series Pump | b min:0.95 mm; r0 max:0.25 mm; f0:16.1; Db min:40.5 mm; d:25 mm; Fatigue limit load, Cu:0.13 kN; Snap ring reference:R37; D4 max:39.8 mm; rNs min:0.3 mm; rNa max:0.3 mm; |
| KAWASAKI 705-41-02200 PC Excavator Series Pump | T max.:200 °C; C:43.55 kN; d:53.98 mm; G:M6x1; Weight:3.37 kg; A1:34 mm; Z:27.5 mm; Recommended tightening torque for set screw:16.8 Nm; s1:27.8 mm; B:55.6 mm; |
| KAWASAKI 705-41-08080 PC Excavator Series Pump | H:36.5 mm; B1:44.3 mm; C:14 kN; T min.:-20 °C; B:34.8 mm; d:25.4 mm; L1:39 mm; A:36 mm; L:130 mm; H2:70 mm; |
| KAWASAKI 705-41-08100 PC Excavator Series Pump | da min:31.5 mm; f0:12.4; Characteristic rolling element frequency, BSF:3.52 Hz; Characteristic cage frequency, FTF:0.37 Hz; Static load, C0:11.5 kN; rs min:1.1 mm; D:62 mm; Da max:55.5 mm; Fatigue limit load, Cu:0.52 kN; Characteristic outer ring frequency, BPF0:2.57 Hz; |