| KAWASAKI 705-56-34000 PC Excavator Series Pump | B:34 mm; Max operating temperature, Tmax:120 °C; Nlim:2,400 rpm; ra max:2 mm; D:180 mm; Characteristic inner ring frequency, BPFI:5.9 Hz; d:100 mm; d1:119 mm; da max:119 mm; f0:14.4; |
| KAWASAKI 705-41-07180 PC Excavator Series Pump | Recommended tightening torque for set screw:3.7 Nm; Designation of bearing:UC202-10G2T04; Designation of housing:FE204-; Weight:0.7 kg; S:12.7 mm; B:31 mm; G:R1/8"; A:29.5 mm; d:15.88 mm; s1:15.5 mm; |
| KAWASAKI 704-24-24420 PC Excavator Series Pump | outer ring width:22 mm; Dynamic load, C:52.5 kN; Internal Special Features:No; Maximum Capacity / Filling Slot:No; Inch - Metric:Metric; Radial clearance class:C3; Static load, C0:36 kN; Product Group:B00308; finish/coating:Uncoated; |
| KAWASAKI 705-41-02690 PC Excavator Series Pump | Weight / Kilogram:1.873; Category:Bearings; Inventory:0.0; ra max:2 mm; E:113 mm; d:60 mm; B:31 mm; Minimum Buy Quantity:N/A; da min:71 mm; Min operating temperature, Tmin:-40 °C; |
| KAWASAKI 705-52-30550 PC Excavator Series Pump | da:50; SRI:3.51; B_:12; C0:12.7; ra:0.6; mass:0.13; KBRG:7024; SREX:0.04; SRIN:0; m0:0.273; |
| KAWASAKI 704-24-24410 PC Excavator Series Pump | Designation of bearing:UC203-11G2T04; T max.:100 °C; SW:3.18 mm; L3:38 mm; C:12.8 kN; Weight:0.58 kg; A5:18.3 mm; B:31 mm; E:21 mm; Recommended tightening torque for set screw:3.7 Nm; |
| KAWASAKI 705-56-34360 PC Excavator Series Pump | J:148.5 mm; A1:13 mm; Weight:1.97 kg; T max.:100 °C; Designation of bearing:EX209-28G2L4; s1:39.7 mm; C0:20.8 kN; A:37.5 mm; N:14mm; A2:58.9 mm; |
| KAWASAKI 708-3S-04573 PC Excavator Series Pump | b min:0.95 mm; r0 max:0.25 mm; f0:16.1; Db min:40.5 mm; d:25 mm; Fatigue limit load, Cu:0.13 kN; Snap ring reference:R37; D4 max:39.8 mm; rNs min:0.3 mm; rNa max:0.3 mm; |
| KAWASAKI 708-3T-04610 PC Excavator Series Pump | s1:30.5 mm; B1:43.5 mm; d1:32.4 mm; A:29.5 mm; A2:45.5 mm; Dz:54 mm; Recommended tightening torque for set screw:5.5 Nm; Weight:0.81 kg; Z:50 mm; C0:6.65 kN; |
| KAWASAKI 705-41-02200 PC Excavator Series Pump | T max.:200 °C; C:43.55 kN; d:53.98 mm; G:M6x1; Weight:3.37 kg; A1:34 mm; Z:27.5 mm; Recommended tightening torque for set screw:16.8 Nm; s1:27.8 mm; B:55.6 mm; |
| KAWASAKI 704-24-24430 PC Excavator Series Pump | B1:40 mm; N:19mm; A1:16 mm; d:50 mm; e:22 mm; C:33 kN; B:22 mm; s1:25.2 mm; H:197 mm; Weight:2.08 kg; |
| KAWASAKI 705-41-07500 PC Excavator Series Pump | N:17mm; S:18.8 mm; T max.:100 °C; J:127 mm; B1:51.1 mm; d:31.75 mm; Designation of housing:P207-; Recommended tightening torque for set screw:8 Nm; G:M6x1; H:47.6 mm; |
| KAWASAKI 705-41-07001 PC Excavator Series Pump | N:14mm; A1:32 mm; G:R1/8"; Dz:95 mm; Designation of open end cover:SCO209-45; Recommended tightening torque for set screw:11.5 Nm; H1:21.5 mm; T min.:-40 °C; Weight:2.24 kg; C:31.85 kN; |
| KAWASAKI 705-11-34110 PC Excavator Series Pump | Designation of housing:PLE204N-; H2:63.7 mm; N1:17 mm; Designation of bearing:UC202G2L4; s1:15.5 mm; T max.:100 °C; N:11mm; Z:16.5 mm; Recommended tightening torque for set screw:5.5 Nm; G:M6x1; |
| KAWASAKI 705-41-01620 PC Excavator Series Pump | Designation of bearing:UC212G2L3; d:60 mm; C:52.5 kN; T min.:-20 °C; N:18mm; G:M6x1; H:68.3 mm; s1:32.55 mm; Designation of housing:PLE212N-; S:25.4 mm; |
| KAWASAKI 705-55-24110 PC Excavator Series Pump | Internal Clearance:C3-Loose; f0:12.7; Inventory:0.0; Min operating temperature, Tmin:-60 °C; EAN:0692314539958; Dynamic load, C:7.75 kN; Long Description:15MM Bore; 35MM Outs; Fatigue limit load, Cu:0.16 kN; Enclosure:Open; Minimum Buy Quantity:N/A; |