| KAWASAKI 705-52-20050 PC Excavator Series Pump | Recommended tightening torque for set screw:3.7 Nm; L:95 mm; B1:44.3 mm; d:25.4 mm; Designation of bearing:EX205-16G2L3; Designation of housing:FE205-; A2:45.9 mm; N:11,5mm; T max.:100 °C; A:30 mm; |
| KAWASAKI 705-40-01920 PC Excavator Series Pump | B1:28.6 mm; s1:23.05 mm; H2:57 mm; H:30.2 mm; C:9.55 kN; A1:18 mm; T max.:100 °C; Weight:0.43 kg; N1:19 mm; H1:10 mm; |
| KAWASAKI 705-52-31180 PC Excavator Series Pump | Nlim (oil):4,800 rpm; Min operating temperature, Tmin:-40 °C; d:80 mm; Dynamic load, C:190 kN; Category:Bearings; E:147 mm; rs min:2.1 mm; Nlim (grease):4,100 rpm; Inventory:0.0; ra max:2 mm; |
| KAWASAKI 704-24-24420 PC Excavator Series Pump | C:12.8 kN; S:12.7 mm; L1:42 mm; T min.:-40 °C; Designation of bearing:UC202G2T04; N:13mm; T max.:100 °C; C0:6.65 kN; G:M6x1; A1:22 mm; |
| KAWASAKI 705-52-30670 PC Excavator Series Pump | G:M6x1; Weight:4.97 kg; L:150 mm; Designation of housing:PG212-; T max.:100 °C; S:30.9 mm; T min.:-20 °C; L1:50 mm; d:60 mm; d1:82 mm; |
| KAWASAKI 708-3T-04610 PC Excavator Series Pump | s1:30.5 mm; B1:43.5 mm; d1:32.4 mm; A:29.5 mm; A2:45.5 mm; Dz:54 mm; Recommended tightening torque for set screw:5.5 Nm; Weight:0.81 kg; Z:50 mm; C0:6.65 kN; |
| KAWASAKI 705-41-02310 PC Excavator Series Pump | L3:121 mm; Weight:7.8 kg; A5:37.3 mm; Recommended tightening torque for set screw:16.8 Nm; Designation of housing:T215-; N2:70 mm; N1:32 mm; SW:4.76 mm; S:37.3 mm; T max.:100 °C; |
| KAWASAKI 708-3T-04620 PC Excavator Series Pump | G:M6x1; A1:50.8 mm; H:68.3 mm; T min.:-20 °C; J:193.7 mm; Designation of housing:PLE212N-; H1:28.6 mm; Z:35.6 mm; Weight:5.23 kg; C:52.5 kN; |
| KAWASAKI 705-54-20010 PC Excavator Series Pump | Mass:0.45 kg; rs min:1.5 mm; Fatigue limit load, Cu:1.13 kN; Da max:72 mm; d:35 mm; da max:46.2 mm; Characteristic inner ring frequency, BPFI:4.93 Hz; f0:13.2; Nlim:6,300 rpm; Max operating temperature, Tmax:150 °C; |
| KAWASAKI 705-55-13020 PC Excavator Series Pump | e:10 mm; A2:32.1 mm; B:19.1 mm; Weight:0.54 kg; Designation of housing:FC203-; C:9.55 kN; H3:62; d:12.7 mm; Recommended tightening torque for set screw:3.7 Nm; N:12mm; |
| KAWASAKI 708-3S-04573 PC Excavator Series Pump | b min:0.95 mm; r0 max:0.25 mm; f0:16.1; Db min:40.5 mm; d:25 mm; Fatigue limit load, Cu:0.13 kN; Snap ring reference:R37; D4 max:39.8 mm; rNs min:0.3 mm; rNa max:0.3 mm; |
| KAWASAKI 705-45-01270 PC Excavator Series Pump | Z:22 mm; Weight:0.44 kg; A:25.5 mm; Designation of bearing:ES201G2T20; B1:28.6 mm; G:M6x1; T min.:-20 °C; C0:4.78 kN; T max.:200 °C; C:9.55 kN; |
| KAWASAKI 708-3S-04570 PC Excavator Series Pump | Mass:1.34 kg; s max:2 mm; Lubrication hole on inner ring:Non/No; D:130 mm; Inner ring reference:1R100X110X40; Lw:32 mm; F:110 mm; Da max:123.5 mm; Nlim (grease):2,400 rpm; ras max:1 mm; |
| KAWASAKI 705-56-24020 PC Excavator Series Pump | Designation of bearing:EX209G2; A:60 mm; E:25 mm; C:31.85 kN; J:90 mm; Designation of housing:PA209N-; T min.:-20 °C; L:120 mm; Recommended tightening torque for set screw:11.5 Nm; Dz:95 mm; |
| KAWASAKI 705-11-34110 PC Excavator Series Pump | Designation of housing:PLE204N-; H2:63.7 mm; N1:17 mm; Designation of bearing:UC202G2L4; s1:15.5 mm; T max.:100 °C; N:11mm; Z:16.5 mm; Recommended tightening torque for set screw:5.5 Nm; G:M6x1; |
| KAWASAKI 20T-60-00400 PC Excavator Series Pump | Min operating temperature, Tmin:-20 °C; Characteristic inner ring frequency, BPFI:4.43 Hz; B:14 mm; da max:27.5 mm; f0:12.4; Mass:0.11 kg; d1:27.5 mm; rs min:1 mm; Static load, C0:6.6 kN; Nlim:27,000 rpm; |